USA: 832-397-9433

LuvataPump

Beyond the ordinary

Luvata has a diverse knowledge of metals and processes and an unmatched range of end-markets and global footprint.

ElectroFin® E-Coat

Colour   Black
Dry film thickness ASTM D7091 0.6-1.2 mils
Gloss - 60 degrees ASTM D523-89 65 - 90%
Pencil hardness ASTM3363-00 2 H minimum
Water immersion ASTM D870-02 >1000 hours at 100 degrees F
Cross hatch adhesion ASTM D3359-97 4B-5B
Impact resistance ASTM D2794-93 160 in./lbs. direct
Salt spray ASTM B117-97 6,048+ hours
Humidity ASTM D2247-99 1,000 hours minimum
Durability - Very flexible, consistent film
Heat transfer reduction ARI 410 Less than 1%
Bridging - No bridging guaranteed
Coating of enhanced fins - Up to 30 fins per inch
pH range - 3 to 12
Temperature limits -40 degrees F to 325 degrees F

Product Alcum Standard centrifugal
ElectroFin® E-Coat was designed to protect HVAC&R coils from corrosive environments and is a market-leading product, used by every major OEM.

It has excellent corrosion resistance, as well as uniformity of coverage and coating thickness, and is recognised internationally as the best corrosion protection for fin and tube heat exchangers in coastal environments.

ElectroFin® E-Coat benefits

  • Increased efficiency and length of service of HVAC&R systems.
  • Reduced maintenance, replacement and operating costs.
  • Corrosion protection with complete coverage of metallic surfaces and sharp edges.
  • Uniform film thickness from the outside fin edges to the deepest and most recessed areas internally.
  • Flexibility means that bent fins can be straightened with no cracking or flaking of coating.
  • Thermal conductivity is not measurably diminished compared with uncoated coil because of the thin film thickness and uniformity. The thermal performance of a coated coil is better than that of a fouled, oxidised coil.
  • Guaranteed 100% coverage of any fin design, including enhanced fins up to 30 fins per inch, without bridging.
  • Coil useful life is 3-5 times longer than the life of an uncoated coil in the same location and environment.
  • ElectroFin® E-Coat process

    ES² technology

    Luvata Insitu® contains ES2 (embedded stainless steel pigment) technology, an anticorrosion coating specifically designed for the protection of coils mounted in corrosive areas. Coils will have a permanent, water-based synthetic coating with ES2 pigment applied to all coating surface areas without material bridging between fins.

    ElectroFin

    Luvata ElectroFin E-coat

    Factory-Applied Corrosion-Resistant Coil Coating



    Luvata ElectroFin EN

    Heat transfer coatings

    Luvata ElectroFin ES

    Revestimientos de transferencia de calor



    ElectroFin technical datasheet EN

    General description

    ElectroFin ficha técnica

    Descripción general